index

SUNDELTA,INC.

1-206,
Hongoku, Kumagaya City,
Saitama Pref., 360-0815,
Japan
Phone +81-48-522-4977
Fax +81-48-525-8819

MAIL



PNEUMALEAD TORQUE ACTUATORS

TYPE CNR-20

Feature


CNR-20 CNR-20

Specifications

Medium for use compressed air
Bore ø20
CNR-20 - 90, 180 Basic oscillating angles are 90 and 180

CNR-20W Oscillating angles are adjustable.
specify angles when ordering.
CNR-20L Longer shaft.
See the table of specification about dimension of shaft.
CNR-20SW Proximity switches are attached.
See the specification below about switches.
CNR-20WL With longer shaft.
Rotation angles are adjustable. Specify angles when order.
CNR-20SWL With longer shaft and switch.


Max. pressure permissible 0.7MPa
Proof pressure 1.05MPa
Min. pressure permissible 0.2MPa
Ambient Temperature - 10 + 80C
Effective Torque See below

Torque Diagram

CFR-20 TORQUE

Dimensions

CNR-20
CNR-20SW
dimension

Specification of Proximity Switches

Type contact type switch with a lead cord.
Color Red, Orange, Yellow and Green.
Full Load Voltage 5 to 100VAC, 5 to 100VDC
Full Load Current Red : 3-50mA
Orange Yellow and Green : 5-50mA
Internal Voltage Drop Red : 1.8V
Orange Yellow and Green : 2.4V or less
Lamp LED ( Light Emission diode )
Contact 1a Normal Open
Min. Sensitivity 50 gauss or more
Response Delay 0.4 msec. or less
Impact resistance 30G (11m/sec)
Vibration Resistance 20G ( 10-1000 Hz )
Ambient Temperature -10 to 60C
Internal Protection Structure IP67
Lead Cord Length 1M ( Grease Proof Cabtire cord with two thin cables with 0.2mm2 )

Pneumalead
>>PAGE UP